How Car Recycling Works: From Your Driveway to the Steel Mill

By ScrapMyJunkCar Team. Updated . Sources are listed at the end. How we work

Car recycling works as a chain. A junk car buyer or auto recycler takes in the vehicle, records it, drains the fluids and removes hazardous parts, and pulls any parts worth reselling. What’s left, mostly a steel shell, goes to a shredder, where it’s torn into small pieces and sorted into steel, other metals, and leftover residue. Mills and smelters melt the metal down, and much of it ends up in new cars.

The Automotive Recyclers Association (ARA) says its industry recycles more than 4 million vehicles a year in the U.S. and Canada, and that about 86% of a vehicle’s material content is recycled, reused, or used for energy recovery.

If you want the yard-floor view of what happens to one car after it leaves your driveway, see our step-by-step guide to what happens to junk cars. This post zooms out: who does what, what’s recovered, the rules that keep it clean, and how the materials get back into new vehicles.

The Players in the Car Recycling Chain

Stage Who does it What they do
1. Collection Junk car buyers, tow operators, salvage auctions, dealers Buy the vehicle, verify ownership, and transport it
2. Dismantling Auto recyclers, salvage yards, self-service yards Log the VIN, drain fluids, remove hazardous parts, pull and sell reusable parts
3. Shredding Scrap metal processors with industrial shredders Shred the stripped hulk and separate ferrous metal, nonferrous metals, and residue
4. Remelting Steel mills, aluminum and copper smelters Turn sorted scrap into new metal
5. Remanufacturing Parts remanufacturers, battery and converter recyclers Rebuild cores like engines and transmissions; recover lead, plastics, and precious metals

The money flows backward through this chain. Mills pay processors for sorted scrap, processors pay yards for hulks, and yards pay sellers for cars. That’s why a junk car has value even when it doesn’t run: every stage downstream wants something from it. It’s also why scrap prices affect what you’re offered. Our guide to scrap car prices by weight explains that link.

Stage 1: Collection and Paperwork

Recycling starts with a legal transfer. The buyer checks the title, and you sign it over and file your state’s seller notice. Our guides to writing a bill of sale and spotting junk car scams cover the seller’s side.

On the recycler’s side, federal law adds a step. Under the National Motor Vehicle Title Information System (NMVTIS), auto recyclers, junk yards, and salvage yards must report each junk or salvage vehicle they take in, including the VIN, the date they got it, who they got it from, and whether it was crushed, sold, or exported. Reports are due at least monthly. That reporting keeps a scrapped car’s VIN from being reused on a stolen or rebuilt vehicle sold as clean.

Stage 2: Dismantling and Depollution

This is where most of the environmental work happens. Before a car can be shredded, recyclers remove things that would contaminate the scrap or the air.

Fluids

ARA estimates the industry collects and reuses or recycles, each year:

Material Annual amount recovered (ARA estimate)
Gasoline and diesel fuel 8 million gallons
Motor oil 24 million gallons
Engine coolant 8 million gallons
Windshield washer fluid 5 million gallons
Lead-acid batteries 96% of all

For more on that last line, see our guide to car battery recycling.

Refrigerant

Car air conditioners usually reach the end of the line with refrigerant still in them. The EPA makes the final person in the disposal chain, typically the scrap recycler, responsible for making sure the refrigerant is recovered before disposal. If a car arrives already evacuated, the recycler has to keep a signed statement with the name and address of whoever recovered it and the date. The EPA says it doesn’t accept a sticker as proof.

Mercury switches

Many vehicles built before model year 2003 have mercury switches in hood and trunk lights and anti-lock brake systems, according to New York’s Department of Environmental Conservation. Mercury can escape when cars are crushed, shredded, or melted, so New York requires dismantlers, scrap recyclers, and crushers to remove these switches first. A national program run through End of Life Vehicle Solutions provides free collection buckets, transport, and disposal for participants.

Reusable parts

Next comes the part of recycling that earns the most per pound: reuse. Engines, transmissions, alternators, doors, mirrors, wheels, and electronics are pulled, tested, and resold, either from shelves or at self-service yards where customers pull parts themselves. Catalytic converters go to specialty processors that recover platinum, palladium, and rhodium.

Stage 3: Shredding and Separation

Once a car is stripped, it’s flattened for transport and sent to a shredder. The shredder tears the hulk apart, and the output is separated into:

  • Ferrous metal (steel and iron), pulled out with magnets
  • Nonferrous metals like aluminum, copper, and zinc
  • Shredder residue: plastics, foam, glass, rubber, and fabric that’s harder to recycle

Steel is the big prize. The American Iron and Steel Institute says steel makes up about 54% of the weight of the average North American vehicle. For a breakdown of the other metals, see what metals in a car are worth money.

Stage 4: Back Into New Cars

Shredded steel is melted in mills and made into new steel. The steel industry says automobiles maintain a recycling rate of nearly 100%, measured by comparing the steel recovered from old vehicles each year with the steel used to build new ones, and that the steel recovered annually equals the amount needed for nearly 13 million new cars.

The Recycled Materials Association (ReMA) says the recycling industry handles more than 14 million tons of steel from vehicles each year, and that car bodies use more than 25% recycled steel. ARA adds that each ton of new steel made from scrap saves 2,500 pounds of iron ore, 1,400 pounds of coal, and 120 pounds of limestone.

Where Car Recycling Falls Short

The system is efficient, but not perfect:

  • Shredder residue (plastics, foam, glass, and fabric) is the hardest part to recycle. Note that ARA’s 86% figure counts energy recovery, not only recycling and reuse.
  • Unlicensed operators may skip depollution, dump fluids, or scrap cars without reporting VINs.
  • Electric and hybrid batteries need specialized handling that not every yard is equipped for.

As a seller, the single biggest thing you can do is make sure your car goes to a licensed, legitimate business. Our junkyard finder can help you find yards near you. You can also request an offer from our buying partners, who make an offer, tow for free, and pay at pickup.

FAQ

What percentage of a car is recycled? The Automotive Recyclers Association says about 86% of a vehicle’s material content is recycled, reused, or used for energy recovery.

How many cars are recycled each year? ARA says the industry recycles more than 4 million vehicles a year in the U.S. and Canada.

Do recyclers have to drain fluids and remove refrigerant? Refrigerant must be recovered before final disposal under EPA rules, and some states, like New York, require mercury switch removal. Fluid handling is governed by environmental rules that vary by state.

Does my old car really end up in new cars? Much of its steel can. The steel industry says the steel recovered from old vehicles each year roughly matches what’s used to build new ones.

Sources

Ready to sell your junk car?

Get a free cash offer in about 30 seconds. Towing is always free.

Get my offer

Ready to get that car off your hands?

Get a free offer in minutes. Towing is always free and you get paid at pickup.

Get my offer