NHTSA lists 5 safety recalls covering the 2000 Buick LeSabre. Open recalls don't stop you from selling or junking the car, but check your VIN at nhtsa.gov/recalls to see which apply to yours.
Fuel System, GasolineFeb 2004 · NHTSA campaign 04V090000
On certain passenger vehicles equipped with 3800 v6 (l36) engines and certain delphi fuel pressure regulators, the regulators have a much higher than usual rate of fuel leaks. A leak can allow fuel to enter the intake manifold through a vacuum line. If the engine does not start when cranked, the fuel from the leaking regulator and a…
Risk: The backfire can rupture the intake manifold. The rupture of the intake manifold can displace a fuel line, pulling an injector out of place, and causing a fuel leak and possible fire.
Service Brakes, HydraulicApr 2000 · NHTSA campaign 00V114000
Vehicle description: passenger vehicles. Some of these vehicles have internal fluid leaks in the brake hydraulic control unit.
Risk: When the rear brake proportioning, antilock brake, traction control, or stability control feature is activated in some driving situations, the feature may not perform as designed.
Exterior LightingDec 1999 · NHTSA campaign 99V355000
Vehicle description: passenger vehicles. These vehicles do not conform to the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment." the head lamp adjustment device horizontal adjuster may not move the head lamp reflector when the shaft is rotated in a normal manner during aiming.
Risk: Driver visibility may be impaired increasing the risk of a crash.
SteeringOct 1999 · NHTSA campaign 99V301000
Vehicle description: passenger vehicles. The inner tie rod nuts are loose and can result in separation of a tie rod.
Risk: Separation of a tie rod can cause unexpected steering input increasing the risk of a crash.
Service Brakes, HydraulicAug 1999 · NHTSA campaign 99V238000
Vehicle description: passenger vehicles. The brake booster to pedal assembly attachment nuts may be loose.
Risk: If these nuts are loose, the brake pedal may be low, the assembly may be loose, the brakes may not release, and if the nuts back completely off, braking may be lost. Also fume and water intrusion to the passenger compartment can occur.