NHTSA lists 5 safety recalls covering the 1999 Mercury Sable. Open recalls don't stop you from selling or junking the car, but check your VIN at nhtsa.gov/recalls to see which apply to yours.
SuspensionJul 2004 · NHTSA campaign 04V332000
On certain passenger vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district…
Risk: If this occurs, the tire may rupture resulting in a rapid air loss, which could result in a crash.
Seat BeltsSep 1999 · NHTSA campaign 99V250000
Vehicle description: passenger vehicles. The seat belt retractor may have a pin shaft in the switchable elr/alr mechanism that is incorrectly formed. In some circumstances, the switching mechanism could become nonfunctional, preventing the seat belt webbing from being extracted from the retractor. It is also possible that malfunction…
Risk: If the mechanism malfunctions and does not allow the webbing to be extracted, the lap and shoulder belt could not be worn by a vehicle occupant. In the event that the mechanism does not allow the alr mode to be engaged, the operator may be
Power TrainNov 1998 · NHTSA campaign 98V288000
Vehicle description: passenger vehicles equpped with the "california" emissions package. An incorrect transmission oil cooler line was installed. The line contacts the anti-lock braking system module support bracket and over time, can wear and develop a leak.
Risk: Transmission fluid leakage onto the exhaust manifold or catalytic converter can result in a fire.
Vehicle Speed ControlSep 1998 · NHTSA campaign 98V204000
Vehicle description: passenger vehicles. A dash insulator retainer clip was not fully assembled to the accelerator cable dash fitting. The clip can disengage from the accelerator cable and fall into the accelerator pedal arm pivot area.
Risk: If this condition occurs, the engine may not fully return to idle. Also, the insulator may not stay in the intended location and could interfere with the accelerator cable.
Seat BeltsAug 1998 · NHTSA campaign 98V198000
Vehicle description: passenger vehicles equipped with manual seat tracks. The front seat belt buckle attaching stud may have been improperly heat treated. This heat treatment may have resulted in cracks developing in the stud.
Risk: If the stud is cracked, in the event of a vehicle crash, the occupant may not be properly restrained, increasing the risk of personal injury.