NHTSA opened 5 defect investigations covering the 1995 Chrysler Sebring.
SteeringDP03002 · opened May 2003, closed Jul 2003
Steering column separation
Mr. Larry a. Sackey submitted a petition to the national highway traffic safety administration (NHTSA) by letter dated april 18, 2003, requesting that nhtsafurther investigate the defective collapsible steering shaft system on 1987-1995 vehicles manufactured by the daimlerchrysler corporation.in part because of 49 cfr
Seat BeltsPE02082 · opened Nov 2002, closed Apr 2003
Safety belt cinching latch plate
There are no injuries or fatalities associated with this alleged defect.while conducting this investigation, odi found that the subject cinches meet the load bearing requirements of federal motor vehicle safety standard 208, and that many of the reported failures were due to incorrect child safety seat installations. A
SuspensionRQ00015 · opened Aug 2000, closed Apr 2001Led to recall 00V421001
Lower contrtol arm ball joint
There is no summary currently available
SuspensionPE99008 · opened Feb 1999, closed Apr 1999Led to recall 99V066001
Ball joint
allege failure of front ball joints may cause the driver to loose control of the vehicle as the front suspension collapses on one side.this loss of control increases the risk of a vehicle crash.
Power TrainPE98001 · opened Jan 1998, closed May 1998
Automatic transaxle ignition interlock
Alleged failure of the automatic transaxle ignition interlock system either allows the ignition key to be removed when the transmission gear selector is not in the park position or prevents the ignition key from being removed when the transmission gear selector is in the park, or any other, position.